| |
Midi 2/2002
The
defrost device, that removes the ice that forms on the inside
of the machine when the environmental temperature drops, more
or less, below 15°C, is controlled by an electronic card loaded
with an algorithm that reduces the defrosting time to a minimum
to maintain machine efficiency at a maximum under all operating
conditions. The condensate collection tank is amply dimensioned
(capacity about 6L in the NADER MIDI series), it is built so as
to prevent the water from overflowing when the machines is moved
and it has a cover that can be opened (only the NADER MIDI series)
to allow internal cleaning. All models are fitted with a humidistat,
tank full control and a connector for continuous condensate drain.
The latter is situated at the bottom of the tank to prevent water
from stagnating resulting, in the long run, in the formation of
algae and bad odour. If the continuous water drain should get
blocked the machine water level control should stop it, thus preventing
overflow and flooding. The environmental air is sucked in at the
front of the machine and is expelled out at the top, so that it
can even be placed between two pieces of furniture and the wall,
reducing the floor space occupied to a minimum. The dehumidifiers
of the NADER MIDI series operate on the refrigeration gas R134a:
both these gases are “ecological” for the maximum
respect of the environment. All these qualities make our machines
efficient and long lasting with characteristics that normally
are only found in professional appliances.
8 litres per 24 hour at 25°C
at 65% relative humidity
13 litres per 24 hour at 30°C
at 80% relative humidity
Watt 255-285
Weight 26.4 Kg
Dimensions hxwxd (mm) 555 x 398 x 382
|
